Intermec ScanPlus 1802 Getting Started Manual page 2

Quick setup
The ScanPlus Cordless System consists of a base station (MicroBar 9735) and at
least one scanner (ScanPlus1802).
Step 1
Read the Recommendations............................................... 3
Step 2
Choose your connection:
PC Keyboard wedge cable ..................................... 4
RS-232 C cable............................................................ 6
Step 3
Select symbologies for your scanners .............................8
If necessary . . .
Return to the default setup.............................................. 9
Using more than one Cordless System ........................ 9
Use the EasySet software for additional setup
options..................................................................................10
Operating your Cordless System.................................11
Add more scanners to your system .............................11
Test bar codes.....................................................................16
2
Step 1
15 - 25 m
(50 - 80 ft)
Recommended
The MicroBar 9735 must not be connected by the RJ connectors to any type of telecom-
munications circuits.
Recommendations
0 - 15 m
(0 - 50 ft)
Not recommended
3