Replacing Blades; General Maintenance - Ryobi RHT2660DA Operator's Manual

Petrol hedge trimmer

Hide thumbs Also See for RHT2660DA:

User manual (239 pages)

Table Of Contents

Table of Contents

WARNING:

When servicing, use only iden ti cal replacement parts.

Use of any other parts may create a hazard or cause

product damage.

WARNING:

Always wear safety goggles or safety glasses with side

shields during product operation. If operation is dusty,

also wear a dust mask.

WARNING:

Before inspecting, cleaning, or servicing the machine,

shut off engine, wait for all moving parts to stop, and

disconnect spark plug wire and move it away from spark

plug. Failure to follow these instructions can result in

serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics

are susceptible to damage from various types of commercial

solvents and may be damaged by their use. Use clean cloths

to remove dirt, dust, lubricant, grease, etc.

WARNING:

Do not at any time let brake fluids, petrol, petroleum-based

products, penetrating lubricants, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which may result in serious personal

injury.

Only the parts shown on the parts list are intended to

be repaired or replaced by the customer. All other parts

should be replaced at an Authorised Service Centre.

WARNING:

Blades are sharp. When handling the blade assembly,

wear non-slip, heavy-duty protective gloves. Do not

place your hand or fingers between blades or in any

position where they could get pinched or cut. NEVER

touch blades or service unit with the spark plug wire

connected.

MAINTENANCE