Launching A Kvm Session - Avocent DSR Installer/User Manual

To print a DSR switch on-board web interface window:
1. In the top option bar, click PRINT or the print icon. The Print dialog box will appear.
2. Specify the options you wish to use for printing the DSR switch on-board web interface
window.
3. Click Print to print the DSR switch on-board web interface window and close the Print
dialog box.
Refreshing a window
A DSR Explorer window may be refreshed at any time by clicking REFRESH or the refresh
icon in the top option bar.
Logging out
A user may log out at any time by clicking the logout icon in the top option bar.

Launching a KVM Session

NOTE: When in IPv4 mode, Java 1.5 or later is required. When in IPv6 mode, Java 1.6 or later is required.
Currently, MAC operating systems only support Java 1.5, so users with MAC operating systems cannot yet operate
in IPv6 mode.
To launch a KVM session from the DSR Explorer:
1. From the DSR Explorer, select Target Devices in the side navigation bar. A list of available
devices will appear.
2. Click the KVM session link to the right of the target device that you wish to access. The
Video Viewer will launch. For more information on the Video Viewer, see Chapter 4 on
page 89.
If the target device is currently in use, users attempting access will be given an opportunity to
force a connection to the device if their preemption level is equal to or higher than the current
user's.
Users may also launch KVM sessions from the Unit Overview window.
To delete offline IQ modules:
1. If you wish to only list target devices that are available and powered, click Appliance -
Appliance Settings - Ports - IQ modules to activate the Appliance IQ modules window.
2. Click the Delete Offline button.
Chapter 4: Web Interface Operations 51