10
Digitally Cascading DS2416 Cards
Digitally Cascading DS2416 Cards
Using the digital "I" and "O" connectors, two DS2416 cards can be digitally
cascaded for common busing and 48-channel mixing.
Install the second DS2416 into a PCI slot adjacent to the first
1
DS2416, as explained previously.
Using the supplied 14-pin to 16-pin cables, connect the "I" con-
2
nector on the second DS2416 to the "O" connector on the first
DS2416, and the "O" connector on the second DS2416 to the "I"
connector on the first DS2416, as shown below.
Replace the computer's cover.
3
Use the included setup utility to configure each card.
4
DS2416—Owner's Manual
O
I
DS2416
O
I
DS2416