Connecting an SW1000XG Sound Card
The Yamaha SW1000XG PCI Sound Card features an XG tone generator,
onboard effects, MIDI interface, and analog inputs, and by connecting it to
the "I" connector on a DS2416, its outputs can be digitally connected to the
DS2416 mixer via its sub inputs. Note that you cannot use an SW1000XG
card with two digitally cascaded DS2416 cards.
Install the DS2416 and SW1000XG cards in your computer.
1
Using the supplied 14-pin to 16-pin cables, connect the "I" con-
2
nector on the DS2416 to the "??" connector on the SW1000XG,
as shown below.
Replace the computer's cover.
3
Use the included setup utility to assign the DS2416's mixer inputs
4
to connector "I" (sub inputs).
Connecting an SW1000XG Sound Card
I
DS2416
SW1000XG
DS2416—Owner's Manual
11