Logging On To Swannview Link; Swannview Link Interface - Swann 960H Digital Video Recorder Instruction Manual

BASIC SETUP
EN
Setting up your PC

Logging on to SwannView Link

• To connect from your PC to your DVR, make sure your DVR is on and
all connections are ok.
• On your PC, open the email that your DVR sent when you were
setting up your email account during the Setup Wizard which should
look something like this image and locate the the UID:
• Copy the UID (highlight the text - right click with your mouse and
click "Copy"). In this example, start with the X and end with the T then paste it into the field marked UID as shown above
right.
Then, enter your Username (the default of admin is already entered) and Password (default is 12345), then click Login.
•
After a few seconds, you will see your cameras live on your PC.
Main Stream or SubStream?
Each video feed of the DVR is comprised of two components, the
quality of the two streams, and is what you'll see on the DVR itself or via a local network.
Stream, and what you'll see over the Internet or via a mobile device. Typically, the
quality and bitrate than the

SwannView Link Interface

After you successful log on to SwannView Link, you will see the following screen:
Playback and
Backup Links
Need more details?
Full explanation of the SwannView Link's software interface and remote configuration options are detailed in the Reference
chapter from page 51
system, and you'll find more detailed information about all menu options and settings there.
18
Main Stream.
Preview / Playback / Setup
Channel List
to page 56. SwannView Link's software interface is functionally very similar to the DVR's menu
Main Stream and the SubStream.
Image Controls
Main Viewing
Area
Viewing Modes
& Volume Control
Main Stream
Substream is a fraction of the
Substream will be of significantly lower
is the higher
Main