Removal From Storage - Honda F200 Owner's Manual

Honda tiller user manual
Hide thumbs Also See for F200:
Table of Contents

Advertisement

Removal From Storage
l
Remove the spark plug and pull the starter handle several times.
l
Check that the spark plug is clean and properly gapped, then reinstall and tighten the
plug.
l
Check engine and transmission oil levels.
NOTE:
Oil will deteriorate if left in an engine for a long period of time. Change the engine oil if the tiller
has been stored for several times.
l
Fill the fuel tank.
B
Gasoline is flammable and explosive under certain conditions. Do not smoke or allow flames or
sparks near the equipment while filling tank. Fill the fuel tank only in a well ventilated area.
l
Check operation and condition of all controls. (If any parts are required, use only genuine Honda parts or
their equivalent).
l
Turn the fuel valve ON, start the engine and check operation. (Note: If the cylinder was oiled for storage,
the engine will smoke for a while after it starts. This will clear up.)
26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents