Important Notes; Safety Instructions - Fujitsu PRIMERGY SX910 S1 Operating Manual

2

Important notes

This chapter provides safety instructions which you must observe when
handling your storage blade.
2.1

Safety instructions

I
The following safety instructions are also provided in the manual "Safety
Notes and Regulations" or " 安全上のご注意 ".
This device meets the relevant safety regulations for IT equipment. If you have
any questions about whether you can install the storage blade in the intended
environment, please contact your sales outlet or our customer service team.
V
CAUTION!
The actions described in this manual should only be carried out by
technical specialists.
Equipment repairs should only be performed by service staff.
Any failure to observe the guidelines in this manual, and any
unauthorized opening or improper repairs could expose the user to
risks (electric shock, fire hazards) or damage the equipment.
Please note that any unauthorized opening of the storage blade will
void the warranty and exempt the manufacturer from all liability.
During installation and before operating the device, observe the
instructions on environmental conditions for your device (see
"Technical data" on page
If the storage blade has been moved from a cold environment,
condensation may form both inside and on the outside of the
machine.
Wait until the storage blade has acclimatized to room temperature
and is absolutely dry before starting it up. Material damage may be
caused to the storage blade if this requirement is not met.
V
CAUTION!
Only transport the device in its original packaging or in suitable
packaging which protects it from knocks and jolts.
SX910 S1
13)
Operating Manual
section
15