Important Notes; Notes On Safety; Esd Label - Fujitsu PRIMERGY S40-DF Manual

Capacity extension

Table of Contents

PRIMERGY S40-DF capacity extension

1.3

Important notes

1.3.1

Please observe all the safety instructions given in the documentation of the

PRIMERGY S40-DF as well as the following notes:

CAUTION!

The actions described here should only be performed by technicians,

service personnel or technical specialists. Any failure to observe the

guidelines in this manual could expose the user to considerable risks

(electric shock, fire hazards) and could also damage the equipment.

Note that any unauthorized opening of the device will result in the

invalidation of the warranty and exclusion from all liability.

Make sure that no objects (such as bracelets or paper clips) or liquids

fall into the device, as this may result in an electric shock or a short

circuit.

Before opening the unit, switch off the device and then pull out the

power plugs.

Note that switching off the device does not disconnect it from the

power supply. To ensure that the device is fully disconnected from the

power supply, you must pull out the power plugs.

1.3.2

Systems and components which might be damaged by electrostatic discharge

(ESD) may be marked with the following label:

Figure 1: Label indicating ESD-sensitive devices

U41100-J-Z156-1-74

Important notes

Table of Contents