Important Notes; Notes On Safety - Fujitsu PRIMERGY S10 Manual

2

Important notes

2.1

Notes on safety

In this section you will find information that you must note when using the
storage subsystem.
This device complies with the relevant safety standards for IT equipment,
including electronic office machines, intended for use in the office environment.
I
You will also find the following safety instructions in the manual entitled
"Safety, Guarantee and Ergonomics" which also includes other notes on
guarantee and ergonomics. Also pay attention to the notes in the manual
of the connected PRIMERGY system.
If you have any questions relating to setting up and operating your system in the
environment where you intend to use it, please consult our service organization.
V
The actions described in these instructions should only be performed


by technicians, service personnel or technical specialists. Equipment
repairs should only be performed by qualified staff. Any failure to
observe the guidelines in this manual could expose the user to risks
(electric shock, fire hazards) and could also damage the equipment.
Note that any unauthorized opening of the device will result in the
invalidation of the warranty and exclusion from all liability.
Transport the device in its original packaging or in other suitable


packaging which will protect it against shock or impact.
Read the notes on environmental conditions in section "Technical


data" on page 4 before setting up and operating the device.
If the device is brought in from a cold environment, condensation may


form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
U41181-J-Z156-1-74
7