2D Symbologies
Maxicode — continued
Maxicode Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Scan the END bar code.
START / END
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 2
142
Appendix C, Alpha-Numeric Pad
the length.
For Maxicode labels, only the data characters are included in the length
calculations.
Any value set higher than 138 will be considered to be 138.
NOTE
PROGRAMMING bar codes
and scan the four digits (zero-padded) representing
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 0138
Magellan
TM
3300HSi