Microsd Function Details; From Scanner To Microsd Card; Capture And Save An Image To A Microsd Card By Scanning A Label; Export A Configuration File From The Scanner To The Microsd Card - Datalogic Magellan 3300HSi Product Reference Manual

microSD Function Details

From Scanner to microSD Card

Capture and save an image to a microSD card by scanning a label.

1. Insert the microSD card into the scanner
2. Scan the Capture Label
The scanner enters image capture mode.
3. Place the item to be captured in front of the scanner.
Press the Remote Camera Button if the scanner has this optional accessory connected. Otherwise, wait for 5
seconds and the scanner will automatically capture and save the image to the microSD card.
4. Upon scanner audio indication of completion, an image is saved to the microSD card.
The image file name range is from IMAGE000 to IMAGE999. if the same name already
exists in the microSD card, the scanner skips that name and uses the next. For exam-
ple, if IMAGE000.JPG is already used in the microSD card, the scanner uses
IMAGE001.JPG. The time stamp is not real, since scanner does not have a real time
clock.
NOTE
Image format (.BMP, .JPG), image size (VGA, WVGA, Full size), Brightness (0~9), con-
trast (0~9), and JPG compression ratio (0~100) are defined in configuration.

Export a Configuration file from the Scanner to the microSD card

By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTORUN.DLS.
$START$
DUMPCFG,SDCONFIG.TEX (Filename can be anything, for example "SOMETHING.TEX")
$END$
2. Save or copy file AUTORUN.DLS to microSD card
3. Insert the microSD card to scanner
4. Wait for 3 seconds,
A scanner configuration file named SDCONFIG.TXT is saved to the microSD card.
Product Reference Guide
microSD Function Details
183