Length Control; Code 93 Length 1, Length 2 Programming Instructions - Datalogic Magellan 3300HSi Product Reference Manual

Symbologies
Code 93 — continued

Length Control

Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
START / END
Fixed Length Decoding

Code 93 Length 1, Length 2 Programming Instructions

See
Length 1, Length 2 Programming Instructions on page 154
this feature.
START / END
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 2
122
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
PROGRAMMING bar codes
For Code 93 bar codes, only the data characters
are included in the length calculations.
NOTE
PROGRAMMING bar codes
Variable Length Decoding
DEFAULT
for detailed instructions on setting
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 50
Magellan TM 3300HSi