Datalogic Magellan 3300HSi Product Reference Manual page 13

5. Switch the terminal OFF.
6. Connect the interface cable to the terminal.
7. If required, connect the scanner's AC Adapter to the AC outlet.
8. Switch the terminal ON.
9. Verify operation by scanning a few known-good bar code labels. The scanner should now
10. This concludes the installation instructions.
Figure 3. Countertop Cutouts
c. Adapter w/flange recessed to be flush with counter
Routed ledge
for rim
Cut hole
Product Reference Guide
be communicating the bar code data to the POS terminal.
a. Shelf installation
6.07"
(154.2mm)
6.07"
(154.2mm)
Cut hole
3.42"
(86.9mm)
Shelf Depth
7.40"
(188mm)
6.26"
(159mm)
6.26"
(159mm)
Rim is flush with counter
b. Adapter w/flange above counter
6.26"
(159mm)
Cut hole
Rim rests on top of counter
Radius 0.21" (5.3mm) x4
Routing is 0.050" (1.27mm) deep
7.91"
(201mm)
3.52"
(89.4mm)
Installation
Rim of
adapter
6.26"
(159mm)
3.47"
(88.1mm)
5