NetComm LIBERTY SERIES User Manual page 6

3. Follow the instructions to:
• Change the admin password so only you can access the routers settings.
• Select your time zone.
• Choose whether you want your WAN connection to auto detect or if you
would like to set it up manually.
• Select whether you would like to connect with 3G (Wireless WAN) or ADSL/
Cable (Ethernet WAN). If you select Ethernet WAN you can also select the
connection type. We recommend to keep the default settings (Auto-detect
WAN type) if you are unsure.
• If you select to use 3G you can choose to have your modem auto connect
or you can control the connection manually.
• If you select to use ADSL/Cable, you will be prompted to enter additional
information from your ISP.
• Select whether you want to use a wireless connection and what you would like
the wireless network name (SSID) to be. If you change the wireless network
name, make sure you remember it so you can connect to it later.
• Select your wireless security level. Again, if you change the wireless security
password, make sure you write it down so you can use these details to
connect wirelessly later.
• Setup your VoIP connection. Enter the information as supplied by your VoIP
Service Provider.