La Crosse 1910 Quick Setup Manual

QUICK SET UP MANUAL –
WEATHER CENTER
Using 915MHz wireless transmission of weather data, this unique weather station can be
powered using batteries for all your weather needs in the home or office.
INSTANT TRANSMISSION is the state-of-the-art
This product offers:
new wireless transmission technology,
exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT
TRANSMISSION offers you an immediate update
(every 4.5 seconds!) (every 6.25 seconds for
rain optional) of all your outdoor data measured
from the transmitters: follow your climatic
variations in real-time!
Carefully open and check that the following contents are complete:
Item: Consisting of: Fittings:
Base 1) Main unit
Station
Thermo- 1) Main unit 1) Wall mounting
Hygro 2) Rain
Sensor protection 2) Plastic anchors for
(TX31U-IT) cover
3) 2 x cable ties
Illustration:
screws
screws
1
Wind 1) Main unit 1) 1 x U-bolts for
Sensor with wind
(TX55U-IT) vane 2) 2 x Washers
2) 32ft cable 3) 2 x Nuts
(already 4) 2 x cable ties
attached the
main unit)
3) Mast holder
SETTING UP:
Weather Center
Wireless transmission at
915 MHz - thermo-hygro
transmitter to weather
station
Thermo-hygro
transmitter
Cable connection between the wind sensor and
the thermo-hygro transmitter
Note:
When putting the Weather Station into operation, it is important
to perform in close proximity (e.g. on a table) a complete wiring
and set-up of the system. This step is important to test all
components for correct function before placing and mounting
them at their final destinations (See Positioning below):
mast holder
OPTIONAL
Wireless transmission
at 915 MHz – Self-
Emptying Rain sensor
to weather station
Rain sensor (sold separately )
Wind sensor
Socket for wind
sensor
2