Installing The Device Driver On Windows Operating Systems - Lenovo ThinkPad Basic USB 3.0 User Manual

Hide thumbs Also See for ThinkPad Basic USB 3.0:
Table of Contents

Advertisement

2. Connect the dc-in connector of the power adapter to the dock.
3. Connect the power plug of the power cord to an electrical outlet. Press the power button to turn on
the dock.
Note: Be sure to correctly connect the dock to the power supply. If the dock is not turned on, you will
not be able to use the dock.
4. Connect the USB B plug
5. Connect the USB A plug
computer.
Figure 3. Connecting the dock to the power supply and notebook computer
Notes:
• The dock will not supply power to the notebook computer during the time when it is connected to the
notebook computer.
• Connecting the dock to any connector other than a USB 3.0 connector or using any USB cable other
than a USB 3.0 cable might impact on the dock performance, especially the video playback and Ethernet
performance. However, the supported maximum resolution will not be reduced.

Installing the device driver on Windows operating systems

After you have connected the dock to your notebook computer, you can install the device driver.
6
User Guide
of the USB 3.0 cable to the USB 3.0 connector on the dock.
of the USB 3.0 cable to an available USB connector on the notebook
B
A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ThinkPad Basic USB 3.0 and is the answer not in the manual?

This manual is also suitable for:

Thinkpad basic usb 3.0 dock

Table of Contents