Front Panel - Inter-m Z-500 Operation Manual

ZONE OUTPUT SELECTOR

Front Panel

Front Panel
5 6
1. PAGING BROADCASTING OUTPUT DISPLAY LAMP
Determine using dip switch on the rear side whether PAGING broadcasting is output.
Display lamp turns on at the zone where switch is set to ON.
2. ZONE BROADCASTING STATUS INDICATOR
Display broadcasting status of each zone.
EM
E
If all Zone's status connected with system is '-', display [OFF] on the display window of C-500.
3. EM MIC BROADCASTING OUTPUT DISPLAY LAMP
This lamp turns on if pressing the EM MIC Broadcasting Selection button of the zone to execute EM
broadcasting.
4. TIMER ALARM BROADCASTING OUTPUT DISPLAY LAMP
Determine using dip switch on the rear side whether TIMER (PW-9242, PW-642) broadcasting is output.
Display lamp turns on at the zone where switch is set to ON.
5. BUS SELECT AND BUS GROUP SELECT BUTTON
One of total 6 BUS sound sources can be selected.
BUS is selected to the order of 1, 2, 3, 4, 5, 6, 1, 2, 3.....6 whenever pressing the button. If the last of the left
BUS GROUP BUTTON among 7 channel is pushed long time, right 6 channels change together similarly.
(EXAMPLE : If NO.3 is appointed, right 6 channels are changed into NO.3.)
One more pressing the last of the left button for a long time, then 7 channels are changed into next BUS
altogether.
4
Z-500
1 2 3 4
7 8
FIRE TIMER PAGING
F t
RM BUS
P R 1~6