Table 4-5. Unit Status Traps; Table 4-6. Infeed Status Traps; Table 4-7. Outlet Status Traps - Lantronix SecureLinx User Manual

Status trap
A Status trap is generated when an error condition occurs on a unit, infeed or outlet.
Status traps include the reported Status, the Location of the unit, and identifier and
name of the affected unit, infeed or outlet.
Any Trap Status generates a Status trap and triggers the trap timer. A new trap is
generated at the end of every timer period until the Status returns to a non-error
status.
Status
Normal
NoComm
Status
Status
On
OffError
NoComm
Status
On
Off
OnWait
OffWait
OnError
OffError
OffFuse
NoComm
Note: Traps are generated according to a hierarchical architecture; i.e. if a Unit
Status enters a trap condition, only the Unit Status trap is generated. Infeed and
Outlet Status traps are suppressed until the Unit Status returns to Normal.
Change trap
The Change trap is generated for all outlet status changes between any on/off
conditions. Change traps include the outlet status, Location of the unit, and identifier
and name of the affected outlet. For descriptions of the outlet status types, please
refer to the prior table.
SecureLinx SLP Remote Power Manager

Table 4-5. Unit Status Traps

Error Description
Unit is working correctly
x Communication to the unit has been lost
Error Description

Table 4-6. Infeed Status Traps

Error Description
Infeed is on
x Infeed should be on but no current is sensed at the
infeed
x Communication to the infeed has been lost

Table 4-7. Outlet Status Traps

Error Description
Outlet is on
Outlet is off
Outlet Status in transition
Outlet Status in transition
x Outlet should be off but current is sensed at the
outlet
x Outlet should be on but no current is sensed at the
outlet
x Outlet should be on but a blown fuse has been
detected
x Communication to the outlet has been lost
4: Advanced Operations
72