Operations Commands - Lantronix SecureLinx User Manual

Command
Show Network
Show Outlets
Show Ports
Show System
Show Towers
Version
To display the names of commands that you may execute:
1. At the command prompt, press Enter. A list of valid commands for the current
user appears.

Operations Commands

Operations commands manage outlet states, provide information about the unit's
environment and control session operations.
Note: Users must be granted access to affect any change in outlet state.
Turning outlets on
The On command turns on one or more outlets. When the command completes, a
display indicating all outlets affected and their current states will be displayed.
To turn outlets on:
1. At the command prompt, type on, followed by one or more outlet names
separated by spaces or commas, and press Enter, or
2. Type on, followed by a group name, and press Enter, or
3. Type on all and press Enter.
SecureLinx SLP Remote Power Manager
Description
Display network configuration information
Displays configuration information for all outlets
Displays the serial port configuration information
Displays system configuration information
Displays unit configuration information
Displays the firmware version
3: Operations
36