Lantronix SLB Quick Start Manual

SLB Branch Office Manager Quick Start Guide
WHAT'S
Accessories Included
Part Number
INSIDE
200.2066A
200.2067A
SLB Branch Offi ce Manager Quick Start Guide
WHAT'S Accessories Included Power Cords Included
INSIDE Part Number Description Included power cords vary for kit purchased. Please see www.lantronix.com for
200.2066A Adapter: RJ45 to DB25M (DCE) additional inlet power cords available.
for Sun with DB25 female SLB Part # Power Cord Part # Power Cord Description Quantity
SLB Branch Offi ce Manager Quick Start Guide 200.2067A Adapter: RJ45 to DB25F (DCE) 100-120 VAC (50/60 Hz)
WHAT'S INSIDE Accessories Included Part Number 200.2066A 200.2067A 200.2069A Adapter: RJ45 to DB25F (DCE) for Sun with DB25 male and some HP9000's Adapter: RJ45 to DB9M (DCE) for Description Adapter: RJ45 to DB25M (DCE) for Sun with DB25 female 100-120V SLB882KIT-20P SLB882KIT-15P 100-120V (50/60 Hz) Kit AC Voltage additional inlet power cords available. Included power cords vary for kit purchased. Please see www.lantronix.com for Power Cords Power Cord Description to NEMA 5-15P (15A) Inlet cord: IEC60320/C19 Part Number SLPP12410-01 SLPP12310-01 Inlet cord: IEC60320/C19 for Sun with DB25 male and SLB882KIT-15P SLPP12310-01 IEC60320/C19 to NEMA 5-15P (15A) 2
Quick Start Guide SLB 200.0063 ADP010104-01 Adapter: RJ45 Rolled serial, 0.1m 200.2070A (6.6 Ft.) Cable: RJ45 to RJ45, Cat-5, 2m SGI Onyx (0.33 Ft.) for Cisco and Sun Netra Linux servers RS6000,and PC-based Unix/ for HP9000, SGI Origin, IBM Adapter: RJ45 to DB9F (DCE) SLB8824KIT-AP 200-240V 200-240V SLB8824KIT-EU to NEMA 5-20P (20A) SLPP12A08-01 to BS1363 (UK) Inlet cord: IEC60320/C19 SLPP12810-01 Inlet cord: IEC60320/C19 to Schuko (EU) SLPP12910-01 SLPP12C08-01 IEC60320/C19 to CHINA/ GB (CN) 3112 (AU/NZ) IEC60320/C19 to AS/NZS
110-120V AC 1 HARDWARE REVIEW LCD Keypad Device ports 1-8 500-153 Front View Console Port USB Port USB Port Cable:RJ45 Loopback 200-240V AC LCD Keypad Front View Device ports 1-8 Console Port USB Port some HP9000's SLB882KIT-20P SLPP12410-01 IEC60320/C19 to NEMA 5-20P (20A) 2
10/100 Dual Ethernet ports Power outlets 1-8 Secondary AC Inlet Primary AC Inlet Back View Modem Modem 10/100 Dual Ethernet ports Power outlets 1-8 Secondary AC Inlet Primary AC Inlet Back View Modem 200.2069A Adapter: RJ45 to DB9M (DCE) for
The SLB connects between a server or a piece of IT equipment and (HTTPS/SSL), Secure Shell (SSH), or Telnet session. If a modem is The SLB is a hybrid console manager and power manager in the form a remote user connects to the SLB using a secure web browser used in the SLB, dial-in access is possible in the event that the IP of a space saving 19" 1RU design. an IP network or the Internet. Once installed on the IP network, Cat-5 cable, both of which are supplied with the SLB. need the female DB9 adapter (Part #200.2070A) and a standard For example, to connect a PC to the device port of the SLB, you only SGI Onyx 200-240 VAC (50/60 Hz)
console port to perform maintenance or management tasks. If the configuration. The front panel console port allows a dumb terminal The front LCD panel and keypad allows for quick and easy network or PC with terminal emulation software to locally access manage- the server or IT equipment's command line interface (CLI) via the (on/off/reboot) power control is possible. equipment is connected to one of the SLB power outlets, then network is unavailable. Once connected, the user has access to The default communication parameters for the device ports and the console port are: SLB8824KIT-EU SLPP12810-01 IEC60320/C19 to Schuko (EU) 2
ment functions and connected serial console devices. The device ports allow simple connections to serial devices using adapters and a standard Cat-5 cable. Connect one end of the Cat-5 cable to the device port, and the other end to an adapter that attaches to the serial console of the target system. • 9600 baud • 8 data bits • No parity • 1 stop bit • No flow control The power outlets allow your equipment to use the SLB as its power source. Once connected you can remotely and securely control the state of each outlet (on/off/reboot). 200.2070A Adapter: RJ45 to DB9F (DCE)
Quick Start Guide for HP9000, SGI Origin, IBM SLPP12910-01 EC60320/C19 to BS1363 (UK) 2
RS6000,and PC-based Unix/ SLB8824KIT-AP SLPP12A08-01 IEC60320/C19 to AS/NZS 3112 (AU/NZ) 2
Linux servers SLPP12C08-01 IEC60320/C19 to CHINA/GB (CN) 2
ADP010104-01 Adapter: RJ45 Rolled serial, 0.1m SLB8824KIT-WW SLPP12810-01 IEC60320/C19 to Schuko (EU) 1
(0.33 Ft.) for Cisco and Sun Netra SLPP12910-01 EC60320/C19 to BS1363 (UK) 1
200.0063 Cable: RJ45 to RJ45, Cat-5, 2m SLPP12A08-01 IEC60320/C19 to AS/NZS 3112 (AU/NZ) 1
(6.6 Ft.)
SLB SLPP12C08-01 IEC60320/C19 to CHINA/GB (CN) 1
500-153 Cable:RJ45 Loopback
1 HARDWARE REVIEW
100-120V AC 200-240V AC
Front View Front View
Device ports 1-8 Device ports 1-8
LCD Keypad Console Port LCD Keypad Console Port
USB Port USB Port USB Port
Modem Modem Modem
200.2069A
10/100 10/100
Dual Ethernet Power outlets 1-8 Primary AC Inlet Dual Ethernet Power outlets 1-8 Primary AC Inlet
ports Back View Secondary AC Inlet ports Back View Secondary AC Inlet
The SLB is a hybrid console manager and power manager in the form For example, to connect a PC to the device port of the SLB, you only
of a space saving 19" 1RU design. need the female DB9 adapter (Part #200.2070A) and a standard
Cat-5 cable, both of which are supplied with the SLB.
The SLB connects between a server or a piece of IT equipment and
an IP network or the Internet. Once installed on the IP network,
a remote user connects to the SLB using a secure web browser
(HTTPS/SSL), Secure Shell (SSH), or Telnet session. If a modem is
used in the SLB, dial-in access is possible in the event that the IP
network is unavailable. Once connected, the user has access to
the server or IT equipment's command line interface (CLI) via the
console port to perform maintenance or management tasks. If the
equipment is connected to one of the SLB power outlets, then
(on/off/reboot) power control is possible.
The front LCD panel and keypad allows for quick and easy network
configuration. The front panel console port allows a dumb terminal The default communication parameters for the device ports and the 200.2070A
or PC with terminal emulation software to locally access manage- console port are:
ment functions and connected serial console devices. The device
ports allow simple connections to serial devices using adapters and • 9600 baud • 8 data bits • No parity • 1 stop bit • No flow control
a standard Cat-5 cable. Connect one end of the Cat-5 cable to the The power outlets allow your equipment to use the SLB as its power
device port, and the other end to an adapter that attaches to the source. Once connected you can remotely and securely control the
serial console of the target system. state of each outlet (on/off/reboot).
Quick Start Guide
ADP010104-01 Adapter: RJ45 Rolled serial, 0.1m
200.0063
500-153
SLB
1 HARDWARE REVIEW
100-120V AC
Front View
LCD
10/100
Power outlets 1-8
Dual Ethernet
ports
Back View
The SLB is a hybrid console manager and power manager in the
form of a space saving 19" 1RU design.
The SLB connects between a server or a piece of IT equipment
and an IP network or the Internet. Once installed on the IP network,
a remote user connects to the SLB using a secure web browser
(HTTPS/SSL), Secure Shell (SSH), or Telnet session. If a modem
is used in the SLB, dial-in access is possible in the event that the
IP network is unavailable. Once connected, the user has access
to the server or IT equipment's command line interface (CLI) via
the console port to perform maintenance or management tasks. If
the equipment is connected to one of the SLB power outlets, then
(on/off/reboot) power control is possible.
The front LCD panel and keypad allows for quick and easy network
configuration. The front panel console port allows a dumb terminal
or PC with terminal emulation software to locally access manage-
ment functions and connected serial console devices. The device
ports allow simple connections to serial devices using adapters
and a standard Cat-5 cable. Connect one end of the Cat-5 cable to
the device port, and the other end to an adapter that attaches to the
serial console of the target system.
Description
Adapter: RJ45 to DB25M (DCE) for
Sun with DB25 female
Adapter: RJ45 to DB25F (DCE) for
Sun with DB25 male and some
HP9000's
Adapter: RJ45 to DB9M (DCE) for
SGI Onyx
Adapter: RJ45 to DB9F (DCE)
for HP9000, SGI Origin, IBM
RS6000,and PC-based Unix/Linux
servers
(0.33 Ft.) for Cisco and Sun Netra
Cable: RJ45 to RJ45, Cat-5, 2m (6.6
Ft.)
Cable: RJ45 Loopback
Device ports 1-8
Keypad Console Port
Primary AC Inlet
Secondary AC Inlet
Power Cords Included
Included power cords vary for kit purchased. Please see www.lantronix.com for additional
inlet power cords available.
SLB Part # Power Cord Part #
100-120 VAC (50/60 Hz)
SLB882KIT-15P SLPP12310-01
SLB882KIT-20P SLPP12410-01
200-240 VAC (50/60 Hz)
SLB8824KIT-EU SLPP12810-01
SLPP12910-01
SLB8824KIT-AP SLPP12A08-01
SLPP12C08-01
SLB8824KIT-WW SLPP12810-01
SLPP12910-01
SLPP12A08-01
SLPP12C08-01
200-240V AC
LCD
USB Port
Modem
10/100
Power outlets 1-8
Dual Ethernet
ports
For example, to connect a PC to the device port of the SLB, you only
need the female DB9 adapter (Part #200.2070A) and a standard
Cat-5 cable, both of which are supplied with the SLB.
The default communication parameters for the device ports and
the console port are:
• 9600 baud • 8 data bits • No parity • 1 stop bit • No flow control
The power outlets allow your equipment to use the SLB as its pow-
er source. Once connected you can remotely and securely control
the state of each outlet (on/off/reboot).
1
Power Cord Description
IEC60320/C19 to NEMA 5-15P (15A)
IEC60320/C19 to NEMA 5-20P (20A)
IEC60320/C19 to Schuko (EU)
IEC60320/C19 to BS1363 (UK)
IEC60320/C19 to AS/NZS 3112 (AU/NZ)
IEC60320/C19 to CHINA/GB (CN)
IEC60320/C19 to Schuko (EU)
IEC60320/C19 to BS1363 (UK)
IEC60320/C19 to AS/NZS 3112 (AU/NZ)
IEC60320/C19 to CHINA/GB (CN)
Front View
Device ports 1-8
Keypad Console Port
Primary AC Inlet
Secondary AC Inlet
Back View
Quantity
2
2
2
2
2
2
1
1
1
1
USB Port
Modem