Lantronix SecureLinx User Manual page 14

The following network defaults allow unit configuration out-of-the-box through either
Telnet/SSH or via a web browser:
IP address:
Subnet Mask:
Gateway:
The local PC network connection must be configured as Noted below:
Note: Contact your system administrator for instructions in reconfiguring the
network connection. Reconfiguration of your network connection may
require a restart to take effect.
IP address:
Subnet Mask:
SecureLinx SLP Remote Power Manager
192.168.1.254
255.255.255.0
192.168.1.1
192.168.1.x (where x is 2-253)
255.255.255.0
2: Installation
13