Lantronix SecureLinx User Manual page 91

SLP: set tacpriv access admin 14<Enter>
The following command sets the TACACS+ account access level for account 5 to
User:
SLP: set tacpriv access user 5<Enter>Granting and removing input status viewing
privileges:
Granting and removing input status viewing privileges:
The Set TacPriv Envmon command grants or removes input status viewing privileges
to/from a TACACS+ account.
To grant or remove input status viewing privileges for a TACACS+ account:
At the SLP: prompt, type set tacpriv envmon, followed by on or off, optionally
followed by a TACACS+ account number and press Enter.
Example
The following command grants input status viewing privileges to the TACACS+
account 5:
SLP: set tacpriv envmon on 5<Enter>
Displaying the TACACS+ access privilege levels:
The List TacPrivs command displays all TACACS+ accounts with their access
privilege levels.
To display TACACS+ account access privilege levels:
At the SLP: prompt, type list tacprivs and press Enter.
Example
The following command displays all TACACS+ account with their access privilege
level:
SLP: list tacprivs<Enter>
TACACS
Account Name
TACAdmin
PowerUser
User
Guest
Adding outlet access to a TACACS+ account:
The Add OutletToTACACS command grants a TACACS+ account access to one or
all outlets. To grant access for more than one outlet, but not all outlets, you must use
multiple Add OutletToTACACS commands.
To grant outlet access to a TACACS+ account:
At the SLP: prompt, type add outlettotacacs, optionally followed by an outlet name
and a TACACS+ account number. Press Enter, or
Type add outlettotacacs all, followed by a TACACS+ account number and press
Enter.
SecureLinx SLP Remote Power Manager
Access Environmental
Level Monitoring
Admin Allowed
User Allowed
On-Only Not Allowed
View-Only Not Allowed
4: Advanced Operations
90