Table of Contents
Advertisement
Flash cable connects directly
to the P 65+ back
12.3 Camera body specifics
Regardless of which Hasselblad V type camera used, a sync cable is
always connected from the lens to the small connector in the front plate
on either the left or right side of the P+ back.
The flash cable is then connected to the F-connector on the camera
back.
Sync cable connects to one of the two small connectors in the front
plate.
For tethered capture to a computer - plug in a IEEE1394/FireWire cable
in the back.
Mirror Up
if you need to do captures in Mirror Up function on Hasselblad V, 903
CW and 905 CW, set the Latency to Zero Latency. as these bodies are
very quickly ready for next exposure
61
Advertisement
Table of Contents
