Reverb Button - Kawai PR-1 Owner's Manual

3
. Reverb Button Menu
* Press REVERB button. The button will light and the various parameters in the EQ menu will be displayed.
* Press the REVERB button repeatedly to advance through the menu.
* To change the value for the selected parameter, use the "+ YES", "– NO" buttons.
* When you are finished making your settings, press the BACK button to go back to main screen. The REVERB button
light will turn off.
The following parameters are assigned to the EQ button.
1) PIANO MIC REVERB
2) PIANO MIC REVERB TYPE
3) LINE/MIC REVERB DEPTH
4) LINE OUT REVERB
1) PIANO MIC REVERB
You can add reverb to the piano when you practice or record the piano to create the ambience of stage or concert hall. If
you piano is located in a small room you can also simulate the feeling of playing in a concert hall by connecting an
amplifier and external speakers and turning the reverb on.
Setting the reverb depth.
Press the REVERB button. The button will light and the display will show the following information.
PIANO MIC REVERB
DEPTH
Set the value with the "+ YES", "– NO" buttons. You can select the following reverb depth values (OFF, 1 – 10).
OFF does not have any reverb. 10 would be the maximum depth.
2) PIANO MIC REVERB TYPE
Selects the type of reverb.
Press the REVERB button twice. The button will light and the display will show the following information.
PIANO MIC REVERB
TYPE
Set the value with the "+ YES", "– NO" buttons. You can select the following reverb types.
HALL L/M/S simulates the ambiance of a concert hall or theater. HALL L is the largest hall simulation. HALL M/S
simulate progressively smaller halls.
ROOM L/M/S simulates the ambiance of a living room or small rehearsal room. ROOM L is the largest room simulation.
ROOM M/S simulate progressively smaller rooms.
26
OFF
HALL M
HALL L ↔ HALL M ↔ HALL S ↔ ROOM L ↔ ROOM M ↔ ROOM S