Rear Panel - Kawai PR-1 Owner's Manual

REAR PANEL

(C)
(A)
(A) LINE OUT
These 1/4" jacks output the sound from the piano mi-
crophones plus the sounds from any devices that are
connected to the LINE/MIC INPUTS. Use these jacks
to connect the PR-1 to external speakers, PA system
or other device. The Master VOLUME knob DOES
affect these outputs.
(B) PHONES
This jack is used to connect a set of headphones.
(C) PIANO MIC IN
These jacks are used to connect the PR-1's piano mi-
crophones. Please use the supplied cables to connect
the microphones. Use the LEVEL knob next to R and
L to adjust the microphone's recording level. 3 ad-
justs the R (right) microphones, 4 adjusts the L (left)
microphone level.
(D) LINE/MIC IN
Use these jacks to connect external instruments (elec-
tric keyboard or pick-up guitar) or microphones. Any-
thing you connect to these jacks can also be recorded
to the CD.
Even though there are two jacks they do not need to
be used only as stereo inputs. They can be used to
connect two different mono sources such as a guitar
to one jack and a microphone to the other. Press the
EQ button to access that menu and adjust the settings
for these jacks (see pg.23 for more detail).
Use the 5 LEVEL knob to adjust the input level for
both jacks. Use headphones to listen and make sure
the volume level is correct.
Use the level indicator on the front panel to adjust the
signal level for the best sound.
When you connect a microphone switch the 6 LINE/
MIC sensitivity switch to MIC. When you use CD
player, pick-up guitar or keyboard, switch it to LINE.
16
3 1 2 4
(E) (F) (G)
5
7 8
(H)
If nothing is connected to the LINE/MIC inputs to
prevent the noise, set the LINE/MIC sensitivity switch
to LINE and set the LEVEL knob to 0.
(E) POWER
Push the POWER button to turn the PR-1 on.
Turn the power off when the PR-1 is not in use.
(F) DC IN 15V
Use this jack to connect the supplied power adaptor
to the PR-1.
Please do not use any adaptor other than the supplied
adaptor to avoid damage to the PR-1 or the adaptor.
Please unplug the PR-1 if you will not be using it for a
long period of time.
(G) FOOT SW START/STOP
Connect the F1, F-1r foot switch which is sold sepa-
rately.
Use the connected pedal to start/stop the recording or
playback of the CD.
(H) XLR OUT / FIXED LEVEL
7 R, L OUTPUTS
These XLR jacks output the sound from the piano
microphones plus the sounds from any devices that
are connected to the LINE/MIC INPUTS. Use these
jacks to connect the PR-1 to external speakers, PA
system or other device. The Master VOLUME knob
DOES not affect these outputs. The CD VOL knob
(CD player) and the EQ settings (piano sound) DO
affect these outputs.
8 GROUNDLIFT SW
There is a ground lift switch for the XLR jacks. Nor-
mally this switch should be left in the OFF position.
In the event of ground loop noise set the GROUND
LIFT switch to ON.
6
(D)
(B)