BUS
Select the required channel by pressing its SEL button.
Bus Name
The factory default name can be edited.
Bus Type
Aux or Group. The FaderGlow™ color for Aux buses is yellow, for Group buses it is green.
Bus Width
Mono or Stereo. If Stereo is selected then an odd-numbered and the next even-numbered bus are linked.
* Note: This feature is not available on even-numbered busses.
Bus Send
The Bus Send parameter globally sets, for the output bus in question, the signal send from the input strips
to the bus to be either Post-EQ or Pre-EQ.
Page 6 - 10
Soundcraft® Si Series User Guide