Both Rows Mode - SoundCraft Si Series User Manual

Both Rows mode

BUS SENDS button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently-selected input fader chan-
nel to place another channel onto the encoders in both the Upper and Lower rows.
The SEL buttons in the associated input fader bay will illuminate and will track the selection made using the
CHANNEL SCROLL buttons.
NOTE: The range of the Left/Right scroll buttons are the 16 (24 on Si2) channels in the currently selected
fader bay.
OUTPUT PROCESSING button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently-selected output channel
to place another channel onto the encoders in both the Upper and Lower rows.
The SEL buttons in the associated output fader bay will illuminate and will track the selection made using
the CHANNEL SCROLL buttons.
NOTE: The range of the Left/Right scroll buttons are the 12 master faders currently selected in the centre
section.
BUS TO MATRIX button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently-selected matrix output in
order to place another matrix output onto the encoders in both the Upper and Lower rows.
If the MTX/MAST button is selected, the SEL buttons in the associated output fader bay will illuminate and
will track the selection made using the CHANNEL SCROLL buttons.
Note! When in Both Rows mode, the CHANNEL SCROLL buttons next to the upper and lower row of
encoders are linked in their operation.
Soundcraft® Si Series User Guide Page 4 - 15