Mute Groups; Creating Mute Groups; Using Mute Groups - SoundCraft Si Series User Manual

MUTE GROUPS

Creating Mute groups

Pressing the VCA/MUTES SETUP button will enter 'setup' mode, and the SETUP button will be illuminated
white.
Note: The OUTPUT FADERS SELECT VCA button will automatically be selected and will be illuminated blue
because at this point you could intend to setup VCA groups or Mute groups. The next key press tells the
console what it is that you want to do
Pressing one of the USER DEFINED (Mute Group Master) buttons (1-8) will enter 'Mute
Group assign' mode.
1
The selected Mute Group master button will illuminate red to confirm that it is in assign
2
mode.
Pressing the SEL button on any input fader channel will assign it to the selected Mute
3
Group. The SEL buttons on the assigned input fader channels will illuminate red to con-
4
firm their selection to the Mute Group. Pressing the SEL button on an input channel that
is already assigned to that Mute Group will remove it from the group.
USER DEFINED (1-8)
5
Input faders on other layers can be added by selecting the relevant layer using the INPUT
FADERS SELECT A, B, C & D buttons.
6
Pressing the SETUP button again will exit this mode
7
Note: it is possible to select another Mute group button to assign input channels to whilst
still in Mute group assign mode.
8
Note: the VCA SEL buttons and the Mute Group master buttons are interlocking and the
type of Setup mode (Mute Group assign or VCA group assign) will be governed by the
last button pressed.
Note: an input channel can be assigned to more than one Mute Group if required.

Using Mute groups

The eight user-definable buttons are configured as Mute Group masters 1 - 8. These can be used at any
time except when in Mute Group Assign mode (see above).
Any Mute Group Master that has inputs assigned to it will be illuminated white (when setup mode has been
completed and exited).
The Mute Group Master buttons illuminate red when activated.
Any associated input channel ON buttons illuminate red when a Mute Group master button is pressed.
In a similar manner to VCA group mutes, any channel which was ON but muted by a MUTE MASTER will have
its ON indicator changed from green to red.
Page 4 - 4 Soundcraft® Si Series User Guide