Rear Connector Panel - SoundCraft Si Series User Manual

REAR CONNECTOR PANEL

The console has modular rear connector panels, the Analogue-to-Digital and Digital-to-Analogue converters
are contained in the rearcon modules. Each console has one master-section rearcon panel and four channel-
section modules (Si3) or three in the case of the Si2.
The master-section rearcon module has the following connectors:
Master Outputs (Right, Left & Centre)
Monitor Outputs (Right, Left & Centre)
4 pairs of Stereo Line inputs
8 Insert Points (separate send & return
Headphones Socket
Talkback Mic (with 48V Phantom Power)
Talkback External input
Oscillator output
MIDI IN OUT & THRU connectors
HiQnet™ connector
All inputs and outputs are balanced. Each channel-section rearcon module has the following connectors:
16 Mic/Line Input connectors and 8 Bus Output connectors, all on XLRs.
Page 2 - 6
(XLRs)
(XLRs)
(3-pole Jacks),
(3-pole Jacks)
(3-pole Jack)
(XLR)
(XLR)
(XLR)
(each a 5-pin DIN connector),
(XLR-housed EtherCon).
Soundcraft® Si Series User Guide