CHANNEL SCROLL BUTTONS
These buttons are located to the right hand side of both the Upper and Lower rows of encoders in the output
fader section. They are associated with selections in the Upper Row, Lower Row and Both Rows areas. When
a mode is selected that has a Channel Scroll function associated with it, both of the CHANNEL SCROLL but-
tons will illuminate white to indicate that they are active. The user may now scroll with a single button press
of the LEFT and RIGHT scroll buttons to select a different channel. The SEL button on the associated input or
output fader channels will illuminate to show the selection made using the CHANNEL SCROLL buttons.
Upper Row mode
INPUT EQ button selected
The CHANNEL SCROLL buttons allow the user to move the currently-selected input fader channel to place
another channel onto the encoders in the Upper Row.
The SEL buttons in the associated input fader bay will illuminate and will track the selection made using the
CHANNEL SCROLL buttons.
NOTE: The range of the Left/Right scroll buttons are the 16 (24 on Si2) channels in the currently selected
fader bay.
Output EQ button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently-selected output channel
to place another channel onto the encoders in the Upper Row.
The SEL buttons in the associated output fader bay will illuminate and will track the selection made using
the CHANNEL SCROLL buttons.
NOTE: The range of the Left/Right scroll buttons are the 12 master faders currently selected in the centre
section.
Lower Row mode
Input Dyn button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently-selected input fader chan-
nel to place another channel onto the encoders in the Lower Row.
The SEL buttons in the associated input fader bay will illuminate and will track the selection made using the
CHANNEL SCROLL buttons.
NOTE: The range of the Left/Right scroll buttons are the 16 (24 on Si2) channels in the currently selected
fader bay.
Output Dyn button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently selected output channel
to place another channel onto the encoders in the Lower Row.
The SEL buttons in the associated output fader bay will illuminate and will track the selection made using
the CHANNEL SCROLL buttons.
NOTE: The range of the Left/Right scroll buttons are the 12 master faders currently selected in the centre
section.
Page 4 - 14
Soundcraft® Si Series User Guide