Lexicon™ Button (Shortcut); Cue List Button; Cue Control Buttons - SoundCraft Si Series User Manual

LEXICON™ Button (Shortcut)
Pressing the LEXICONS button ( on the UPPER ROW section of the Output master) causes the following screen
to appear. Each of the four inbuilt effects processors can be configured for type via this page.
The cue list can be accessed by pressing the CUE LIST button which is also to the left of the touchscreen.
Note that the CUE LIST button is not enabled until at least one Cue has been generated by pressing the
STORE button on the CUE CONTROL panel (see page 6-3).
Use the ADJUST encoder to move through the cue list.
UPDATE
Pressing this overwrites the selected cue with the console's current settings. A confirmation dialogue box
appears, giving you the option to respond YES or NO to the update being saved.
EDIT
This allows the cue name to be edited, via an on-screen QWERTY keyboard. The following parameters can
also be edited: MIDI program change status, MIDI transmit channel number and MIDI program number.
MOVE ^
This moves the currently-selected cue up one place in the list.
MOVE v
This moves the currently-selected cue down one place in the list.
DELETE
Deletes the currently-selected cue. A confirmation dialogue box appears, giving you the option to respond
YES or NO to the cue being deleted.

CUE CONTROL BUTTONS

Page 6 - 2
Use the ADJUST encoder to position the cursor
over the required processor. Then press the en-
coder to select it. A drop-down menu of effects
types will appear. Use the encoder to scroll and
press to select.
Note: pressing one of the EXPAND buttons
on the top row will automatically select the
required processor.

CUE LIST Button

Soundcraft® Si Series User Guide