Parking Brake; V-Belts - Husqvarna MZ25 Operator's Manual

Parking Brake

Visually check that no damage is found on the lever,
cables, or switch belonging to the parking brake.
Perform a standstill test and check that there is
suffi cient braking action.
To adjust the parking brake, contact the Husqvarna
service workshop.
IMPORTANT INFORMATION
The machine must be absolutely standing still
when applying the parking brake.

V-belts

Check every 100 hours of operation. Check for severe
cracking and large nicks.
NOTE: The belt will show some small cracks in normal
operation.
The belts are not adjustable. Replace belts if they
begin to slip from wear.
MAINTENANCE
Parking brake
WARNING!
Faulty adjustment will result in
reduced braking ability and can
cause an accident.
8061-010