Blade replacement
WARNING!
Blades are sharp. Protect your hands
with gloves and/or wrap blades with
a heavy cloth when handling.
•
Remove blade bolt by turning
counterclockwise.
IMPORTANT INFORMATION
To ensure proper assembly, center hole in
blade must align with star on cutter housing.
•
Install new or resharpened blade with
stamped "GRASS SIDE" facing towards
ground/grass (down) or "THIS SIDE UP"
facing deck and cutter housing.
•
Install and tighten blade bolt securely.
•
Torque blade bolt to 45-55 ft/lbs (60-75 Nm).
IMPORTANT INFORMATION
Special blade bolt is heat treated.
Replace with an original Husqvarna bolt if
required.
Do not use lower grade hardware than
specifi ed.
42
-Husqvarna
MAINTENANCE
1. Blade
2. Blade bolt (special)
3. Cutter housing
Blade attachment