Control Locations; Controls - Husqvarna MZ25 Operator's Manual

This operator's manual describes the Husqvarna Zero
Turn Rider. The rider is fi tted with a Kohler four-stroke
overhead valve engine developing 25 horse power*.

Control Locations

*The power rating of the engines indicated is the average net power output (at specifi ed rpm) of a typical production engine
for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual
power output for the engine installed in the fi nal machine will depend on the operating speed, environmental conditions and
other variables.
18
-Husqvarna

CONTROLS

1. Motion control levers
2. Parking brake
3. Throttle control
4. Blade switch
5. Ignition switch
6. Choke control
7. Fuses
Transmission from the engine is made via a belt-driven
hydraulic pumps. Using the left and right steering
controls, the fl ow is regulated and thereby the direction
and speed.
8. Fuel tank cap
9. Fuel shut off valve
10. Deck lift
11. Seat adjustment lever
12. Hour meter
13. Tracking adjustment