Husqvarna MZ25 Operator's Manual page 36

Hide thumbs Also See for MZ25:
Table of Contents

Advertisement

Maintenance
Check/adjust throttle cable
Check the condition of belts, belt pulleys
Change the engine oil
Replace the engine oil fi lter
Clean/replace the spark plugs
Replace the fuel fi lter
Replace air fi lter
2)
(every 200 hours)
Check the caster wheels (every 200 hours)
Clean the cooling fi ns
Clean fi ns of oil cooler
Change the hydraulic oil (every 300 hours)
Replace the hydraulic oil fi lter (every 300 hours)
Dismantle and inspect starter
Check/adjust the mower deck
Check the engine valve clearance
Perform the 300-hour service
1)
First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
replacement are required more often.
= Described in this manual
= Not described in this manual
=
Refer to the engine manufacturer's Owners Manual
WARNING!
Before performing any service or adjustment checklist
• Engage the parking brake.
• Place the Blade-switch in the disengaged position.
• Turn the ignition switch to "OFF" position and remove the key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect the spark plug wire from all spark plugs and place the wire where it cannot
come in contact with the plug.
36
-Husqvarna
MAINTENANCE
1)
2)
3)
(every 500 hours)
3)
3)
3)
Performed by authorized service workshop.
Daily
Weekly
Before
After
At
Maintenance interval
least
in hours
once
each
year
25
50
100 300
2)
In dusty conditions, cleaning and

Advertisement

Table of Contents
loading

Table of Contents