Table of Contents
Advertisement
n
Replacement
1. Remove the cutter deck from the riding mower according
to the instruc-
tions on pages 56-57.
2. Remove the two 6 mm bolts and the three stopper
bolts shown
below.
3. Grasp the tensioner
arm/pulley
firmly,
and pull the tensioner
arm out-
ward to release tension
on the belt. Then remove and replace the blade
belt.
m
Don't
put your hands between
the pulleys,
and don't let the
tensioner
pulley snap back;
return it slowly.
4. Reassembly
is the reverse of the above procedure.
6 mm BOLTS
59
Hide quick links:
Advertisement
Table of Contents
