Pre-Operation Checks; Cooling Air Intake - Honda H3011H Owner's Manual

4. PRE-OPERATION CHECKS
Following the procedures below 'and check all of the following items
before each use:
1. Park the riding mower on a level surface.
2. Place the shift lever in the neutral position and set the park brake.
3. Disconnect the spark plug cap and remove the engine switch key to
prevent accidental engine start-up.
m
If the engine is started accidentally while you are performing
the pre-operation checks, moving parts may cause serious injury.
COOLING AIR INTAKE
Make sure the cooling air intake screens are clean.
IMPORTANT NOTICE
1 If the cooling air intake screens are blocked the
engine may overheat.
COOLING AIR INTAKE SCREENS
19