Honda H3011H Owner's Manual page 37

. .
l
Seat safety switch operation check.
The seat safety switch automatically stops the engine if the operator's
weight is off the seat when the following inter-locks are actuated.
-
1. While parked on a level surface, move the P.T.O. lever to ON
(Engaged).
Rise off the seat-the engine should stop immediately.
- 2. Return the P.T.O. lever to OFF (Disengaged) and restart the engine.
Release the parking brake and place the shift lever into the 1st gear
or slow mowing range. While driving slowly, rise off the seat-the
engine should stop immediately.
- 3. Move the shift lever back to NEUTRAL and set the parking brake.
Start the engine and release the parking brake. Raise up off the
seat-the engine should stop.
l
Parking brake system inspection
- 1. Set the parking brake.
- 2. Start the engine.
- 3. Set the shift lever into 1st gear or slow mowing range. Check that
the warning buzzer sound, and the engine is stopped several
seconds after.
- 4. Return the shift lever back to the N (Neutral) position, and turn off
the engine switch.
Have your riding mower inspected and repaired by your authorized Honda
riding mower dealer if there is any abnormality.
35