Main Unit Inspection - HTC SM-TP001-0704 Service Manual

Doc. Title Elf/Elfin series model Service Manual

7.2 Main unit inspection

7.3.1 System assembly inspection
General inspective regulations and according SPEC refer to IS-3047 Generic Cosmetic Inspection Criteria.
In the event of any inconsistencies between this document of IS-4176 and the Relationship
Agreement, the parties agree that this document of IS-4176 shall prevail.
Exposure of substratum is not acceptable for peeling. (Area 4 is included)If not exposure of substratum,
please check by SPEC. of dot or scratch. (Area 4 is not included)
Logo may not have blurred or double print., the peeling on logo is not acceptable.
The character printing of main unit does not allow bad printing, scratch, dirty, lacquer peeling, dark/white dot
on it) Camera lens dot, particle D 0.25mm
1. (Gap inspection )
Description
1. Status of main unit assembly.
2. Gap between touch panel and bezel.
3. Gap between upper / lower slid parts.
4. Qwerty key Gap and around Gap
Gap between navigation key and AP
5.
keys assembly.
Gap around power button, record
6.
button, volume key, camera button
7. Stylus
Gap between battery cover and main
8.
unit.
HTC CONFIDENTIAL
6/30/2008 2:33:43 PM
.
HTC Corporation
¡ G
¡Ø ¡F burr
Defective assembly and deformed shape neither were nor
allowed.
Gap between touch panel and bezel < 0.7 mm
(Skip corner and Enter the material to click)
Gap between upper / lower slid parts < 1..0 mm
Between key Gap<0.35 mm, Edge of key and C-part Gap
<0.4 mm
(gap) <0.35 mm
Key stuck is not allowed.
(gap) <0.35 mm
Key stuck are not allowed
Stylus assembly protruding, loose, missing, falling and
deformed is not allowed.
D,E parts(gap) <0.50 mm
Doc. No.
Issued Date
Revised Date
Page
¡ 1.5mm , W 0.2mm , Ø ¡
A c c e p t c r i t e r i a
DOC-00028788
REV.
2007/05/03
A08
2008/03/21
49 of 73
Ø
L e v e l
Minor
Minor
Minor
Minor
Minor
Minor
Minor
Minor
SM-TP001-0704