Main Unit Inspection - HTC ROSE Service Manual

Doc. Title

6.3 Main unit inspection

Cosmetic inspection generic spec:
1. Exposure of substratum is not acceptable for peeling. (Area 4 is included)If not exposure of substratum,
please check by SPEC of dot or scratch. (Area 4 is not included)
2. Logo may not have blurred or double print., the peeling on logo is not acceptable.
3. The character printing of main unit does not allow bad printing, scratch, dirty,
lacquered peeling, dark/white dot on it)
4 .Camera Lens: Contamination dot / foreign matter
≦
D 0.25mm, S 3mm
5. Accessories include Cradle; please follow Class B for inspection.
6. Main unit cosmetic inspection criteria of class D, please follow dummy class C for
inspection criteria.
GAP & STEP INSPECTIONS
Description
Status of main unit assembly
Gap between upper / lower slide
Gaps between Navi keys & Nmber
Gaps between LCD panel and bezel
Gaps between side keys and
mechanical parts
COSMETIC INSPECTION:
Description
Class A
HTC CONFIDENTIAL
HTC Corporation
.
ROSE Service Manual
≧ ；Lint: L 1.5mm , W 0.2mm ≦
Defective assembly and deformed shape were not
0.3m<Gap between upper / lower slide part <
part
0.25mm<Gap between Navi keys & Number
keys
Exposure of substrate do not accept
Scratch : L 4mm ,W 0.2mm ,N 2,
≦ 。
Accept criteria
allowed
0.65mm(V)
keys<0.35mm
0.20mm< Gaps between LCD panel and
bezel<0.35mm
Gaps between side keys and mechanical
parts<0.20mm
Scratch
A c c e p t c r i t e r i a
≦ ≦
Doc. No. DOC-00045381
Issued Date 2008/8/12
Revised Date 2008/11/13
Page 74 of 94
≦ ≧
S 10mm
SM-TP001-0812
REV.
A02
Level
Minor
Minor
Minor
Minor
Minor
MI