Honda FL6555 Operator's Manual page 22

SET-UP INSTFWCllONS
5.
6.
7.
8.
Connect the two 5/8"-38" hoses to the
loader hydraulic valve "IN" and "OUT"
ports as shown.
Install a quick disconnect coupler (female
end) and dust plug onto the 38" hose
connected to the loader hydraulic valve
aJT port.
Install a quick disconnect coupler (male
end) and dust plug onto the 38" hose
connected to the loader hydraulic valve
"IN" port.
Attach two 18" hydraulic hoses and two
20" hydraulic hoses between loader
hydraulic valve and steel hydraulic tubes
as indicated.
Note: Two 20" hoses install between R/H ports
and two upper steel tubes.
Note: Installation of hydraulic hoses to steel
tubes will be easier if you:
a.
b.
C.
Loosen the retainers securing the steel
tubes to the loader arm.
Install hydraulic hoses to steel tubes '
beginning with bottom tuba and working
toward the top. Tighten the hoses to the
steel tubes as they are installed.
Re-secure the steel tubes to the loader
arm using the retainers.
20