SUB FRAME INSTALLATION AND REMOVAL
7. Install right and left Rear Brackets onto
boss
of rear axle using two 12mm x
30mm capscrews and l/2" lockwashers
(no flatwashers) each side.
Torque to 55 foot pounds (7.5 Kgm)
8. Place loader Bracket under tractor as
shown.
9. Remove the (two each side) loosely
installed 12mm x 55mm bolts installed in
step 5.
Using two people, one each side, raise
the Loader Bracket into position. Align the
bolt holes using a drift pin and loosely
install four 12mm x 55mm capscrews,
l/2" lo&washers and l/2" flatwashers on
each side.
\o 0
cl
0 0
0
0
0
'0
a
0
0 I
16