Front Loader Assembly - Honda FL5540K0 Operator's Manual

FRONT LOADER ASSEMBLY

HY 'DRAULIC PUMP MOUNTING
Pump mounting plate and pump drive joint
1.
are installed on pump. Ensure bolts and
set screw are tight.
Attach the pump brackets to the pump
mounting plate using two each %6x2 inch
bolts and flatwashers. The right
5/16"
bracket is shorter than the left. Do not
tighten the bolts at this time.
Apply a light coating of grease to tractor
front PTO at this time.
Mount hydraulic pump to tractor by sliding
2 .
splined pump drive joint onto front PTO
shaft with mounting brackets inside main
frame and attaching with four 5/lsx?4i inch
bolts lockwashers. Tighten
and
pump mounting bolts.
LOADER INSTALLATION
NOTE: The masts and main frame come
.assembled. All cylinders and hoses 'have
been attached to the frame except the two
hoses from the hydraulic pump.
3. Set the loader on its stands and move the
tractor centrally between the masts.
LEFT BRACKET
RIGHT BR A CKET
all
FRONT LOADER ASSEMBLY
PUMP
MOUNTING
PLATE
19