Table of Contents
Advertisement
COUNTERWEIGHT
1. Remove the existing frame lower cover
and replace with the new lower cover
using existing mounting bolts and collar
washers.
Never operate the tractor without
the lower cover.
INSTALLATION INSTRUCTIONS
1 C(M#ECO)IUCISWFACESBEIWEENBUWMrPrJllL
M E
FRAME CAN BE
M E
Note: A second label is included with this
operator's manual. Install this label onto the
original
frame lower cover.
Remove the drawbar and replace it with
2.
the bottom bracket using the two
12 x 25mm hex hd capscrews with
washers and two 10 x 30mm hex hd
capscrews with
and rear bracket bolts as
Torque front cover
follows:
Bolts
Bolts 43 ft-lbs. (60 Nm).
12mm
0 9 h
washers.
ft-lbs.
Nm).
29
(29
and
COUNTERWEIGHT INSTALLATION/REMOVAL
DRAWBAR
- -
NEW LOWER
FRONT COVER
. . -.
. . .
BOLTS
BRACKET
13
Advertisement
Table of Contents
