Honda FL5540K0 Operator's Manual page 18

SUB-FRAME and COUNTERWEIGHT INSTALLATION/REMOVAL
8.
into the channel of the lower cover. Insert
two mounting pins (3/4 x 3.19in) from
inside sub-frame through frame lower
cover. Slip a 3/4in washer over each
mounting pin and insert the clip pins
through the holes.
NOTE: Mounting pins have a flat side that
must be pointing down.
Insert two mounting pins (3/4 x 3.19inj
9.
from inside the bottom bracket through the
sub-frame. Slip a washer over each pin
and retain with a clip pin as shown.
NOTE:
Mounting pins have a flat
must be pointing down.
16
MOUNTING PIN
FLAT SIDE DOWN
side that