Front Loader Assembly - Honda FL5540K1 Operator's Manual

FRONT LOADER ASSEMBLY

HYDRAULIC PUMP MOUNTING
Pump mounting plate and pump drive joint
1.
are installed on pump. Ensure bolts and
set screw are tight.
Attach the pump brackets to the pump
mounting plate using two each
bolts and flatwashers. The right
bracket is shorter than the left. Do not
tighten the bolts at this time.
Apply a light coating of grease to tractor
front PTO at this time.
Mount hydraulic pump to tractor by sliding
2.
splined pump drive joint onto front PTO
shaft with mounting brackets inside main
frame and attaching with four
bolts and lockwashers. Tighten all
pump mounting bolts.
LOADER INSTALLATION
The masts and main frame come assembled.
All cylinders and hoses have been attached
to the frame except the two hoses from the
hydraulic pump.
3. Set the loader on its stands and move the
tractor centrally between the masts.
LEFT BRACKET
inch
RIGHT BRACKET
inch
FRONT LOADER ASSEMBLY
PUMP
MOUNTING
PLATE