Computer System Selection - Sanyo PLC-WU3800 Owner's Manual

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA,
UXGA or WUXGA with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal
source, this projector automatically detects the signal format and tunes to project a proper image without any
additional settings. (Signal formats provided in this projector are shown on pages 74-75)
One of the following messages may appear when:
When the projector can not recognize the
Auto
connected signal conforming to the provided
PC Systems, Auto is displayed on the System
Menu box and the Auto PC adjustment function
works to display proper images. If the image is
not projected properly, a manual adjustment is
required (pp.32-33).
There is no signal input from the computer.
- - - -
Check the connection between your computer
and the projector. (See "Troubleshooting" on
pp.67-70.)
The preset system is manually adjusted in the
Mode 1
PC adjust Menu. The adjusted data can be
stored in Mode 1-5 (pp.32-33).
PC Systems provided in this projector is chosen.
SVGA 1
The projector chooses a proper system provided
in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point
press the Point
3
Use the Point
and then press the SELECT button.
30
buttons to select Input and
or the SELECT button.
buttons to select System and then
or the SELECT button.
buttons to select the desired system
PC System Menu
Customized Mode (1–5)
set in the PC adjust Menu
PC System Menu
(pp.32-33).
Systems in this dialog box
can be selected.
Selected system is
displayed.
RGB(Computer 1)