Image Mode Selection - Sanyo PLC-WU3800 Owner's Manual

Computer Input

Image Mode Selection

Direct Operation
Select the desired image mode among Dynamic, Standard,
Real, Blackboard (Green), Colorboard Image 1, Image ,
Image 3 and Image 4 by pressing the IMAGE button on the
remote control.
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Use the Point
press the Point

Use the Point
and then press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
Use the Point buttons to select Colorboard and then
press the Point or the SELECT button. Use the Point
buttons to select the desired item and then press the
SELECT button.
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Image 1–4
For viewing with the user preset image mode in the Image
adjust Menu (see pages 35-36). This Image memory is
provided in each computer, component and video input
source.
34
buttons to select Image select and then
or the SELECT button.
buttons to select the desired item
Remote Control
IMAGE button
Image Select Menu
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Colorboard
Image 1
Image 
Image 3
Image 4