Playback; Searching For A Desired Song; Quick Search - Alpine CDE-102 Quick Reference Manual

Playback
1
Press SOURCE/<!> to switch to the iPod mode.
TUNER ~ DISC ~ USB AUDIO ~ iPod*I/AUX+*2
~ BT AUDIO*3 ~ AUX*4 ~ TUNER
*1
Displayed only when the iPhoneliPod is connected and AUX+
SETUP is s'et to OFF, refer
to
"Setting the AUX+ SETUP Mode"
(paKe 17).
• 2 Displayed only when the AUX
+
SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 17).
• 3 Displayed only when BT IN is set to BT ADAPTER. Refer to
"Bluetooth SettinK" (page 16).
.4
Refer to "Using the Front AUX Input Terminal" (page 15).
2
Press l-4<1li or
~
to select the desired song.
Return to the beginning of the current song:
Press
l-4<1li.
Fast backward through current song:
Press and hold
l-4<1li.
Advance to the beginning of the next song:
Press
~.
Fast forward through current song:
Press and hold
~.
3
To pause playback, press
~/II/ENT.
Pressing
~/II
lENT again will resume playback.
• A
song playing on the iPhoneliPod while it is connected to this unit
wiJl cominue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing 1 ~ or ~ 2.
• An episode may have several chapters, the chapter can be changed
by pressing
l-4<1li
or
~.
Searching for a desired Song
An iPhone/iPod can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit's
search functions will ease song searches.
Each music catt:gory has its own individual hierarchy. Use the Playlistl
ArtistlAlbum/Song/PodcastiGenre/ComposerlAudiobook search mode
to narrow searches based on the table below.
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlist Song
-
-
Artist' Album' Song
-
Album' Song
-
-
Song
-
-
-
Podcast Episode
- -
Genre* Artist' Album'
Song
Composer' Album' Song -
Audiobook -
-
-
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press
~IESC
to activate the search selection mode.
The ..
~
.. indicator lights up.
2
Turn the Rotary encoder to select the ARTIST
search mode, and then press ~/II/ENT.
PLAYLIST
H
ARTIST
H
ALBUM
H
SONG
H
PODCAST
H
GENRE
H
COMPOSER
H
AUDIOBOOK
H
PLAYLIST
3
Turn the Rotary encoder to select the desired
Artist, and then press
~/II/ENT.
4
Turn the Rotary encoder to select the desired
Album, and then press
~III
lENT.
5
Turn the Rotary encoder to select the desired
Song, and then press ~/II/ENT.
o
Afier pressing and holding ~/II lENT for at least 2 seconds while
in each hierarchy (except SONG and AUDIOBOOK hierarchy), aJl
sanKs of the selected hierarchy are played back.
o
After selecting {ALLf in the search mode with"''', press and hold
~/IIIENT for at least 2 seconds to play back a// songs in the
iPhoneliPod or selected search mode.
o
While in the search mode, if you press and hold ~IESC for
2 seconds, or no operation is petjormedfor 10 seconds, the search
mode is canceled.
• In the search mode, pressing ::!::JIMUTE wiJ/ return
to
the previous
mode.
• When search is made during M.l.X. play, the M.I.X. play mode wiJl be
canceled.
• "NO SONG" wiJl be displayed
if
there are no songs in the selected
play/ist in the PLAYLIST search mode.
• "NO PODCAST" will be displayed if there is no podcast data in the
iPhoneliPod in the PODCAST search mode.
o
"NOAUDIOBOK" wiJl be displayed
if
there is no audiobook dara in
the iPhoneliPod in the AUDIOBOOK search mode.
• If "iPod name" stored in the iPhoneliPod is selected in the desired
Playlist search mode. and ~/IIIENT is pressed, you can search for
aJl songs in the iPhoneliPod. Also,
if
you press and hold ~/II lENT
jor at least 2 seconds. all songs in the iPhoneliPod are played back.
• Depending on the iPhoneliPod, podcast search is not supported.
• If anyone ofthe preset bultons (1 through
6)
is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 20.
Quick Search
You can search a song from all songs in the iPhone/iPod without
selecting an album, artist, etc.
1
Press and hold
~/ESC
for at least 2 seconds to
activate the Quick Search mode.
The
,,~
.. indicator lights up.
2
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
• Press and hold
~/ESC
for at least 2 seconds in the search mode to
cancel. Or. the search mode is canceled ifno operation is performed
jor 10 seconds.
o
If many songs are in the iPhoneliPod, it rakes time to searchjor
sOllgs.
• If anyone ofthe preset bultons (1 through
6)
is pressed in the search
mode, a sean·h can be lIlade quickly by skipping to the specijied
location. For derails, refer to "Direct Search Function" on page 20.
o
This/unction is inactive during repeat
(~)
playback.
19-EN